|
Rubber Conveyor Belts
| We offer a wide range of rubber conveyor belts in varied grades and sizes to meet the demands of our clients. These include belts used for general purpose, heat resistant belt, oil resistant, abrasion resistant, fire resistant , oil and heat resistant. The range offered under this include: |
 
|
|
General Purpose | Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application | | General Purpose | Mpa | % Minimum | MM3 | | Degrees | | | N or N17 | 17 | 450% | 180 | NR | - 45 to + 50 | For moderately abrasive materials such as Rubble, Sand, Super Phosphate, Bone, Coal, Ashes, unslacked lime, cement, bauxite, chalk, cement, Readymix & earth. | | Y as per DIN 22102 | 20 | 400% | 150 | NR | - 45 to + 50 | For abrasive materials like crushed stones, ROM coal, gravel, earth, sized coke, timber etc. | | M or M24 | 24 | 450% | 125 | NR | - 45 to + 50 | Highly abrasive material like large size Ore, crushed metallic Ore, Granite, Limestone, Coke, Cold clinker, all types of slacks, sandstones, chipping, quartz, broken glass gravel etc. Also for stackers and reclaimers. | | X as per DIN 22102 | 25 | 450% | 120 | NR | - 45 to + 50 | Materials mentioned for grade M and material having sharp cutting edges like crushed glass, granite, slacks etc. | | SAR or W as per DIN 102 | 18 | 400% | 90 | PBD Blend | - 45 to + 50 | Extremely abrasive material such as cold clinker, cold sinter, mortar, hardrock, etc. | | SAR+ or A as per AS1332 | 17 | 400% | 70 | PBD Blend | - 45 to + 50 | Extremely abrasive material such as cold clinker,cold sinter, mortar, hardrock, etc. | |
Add to Enquiry Basket  
|
|
Heat Resistant Belt Our expertise and well- developed manufacturing facilities help us in delivering a wide range of heat resistant belts .These come with the features like durability, high elongation and high capacity of heat resistance.
Technical Specification :
| Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application | | Heat Resistance | Mpa | % Minimum | MM3 | | Degrees | | | HRT1 | 12 | 350% | 200 | SBR Blend | + 100 Max for Fines | For hot materials such as crushed cement, foundry sand, fertilizers, clinker, coke etc. | | | | | | + 125 Max for Lumps | | HRT2 | 12 | 350% | 180 | SBR Blend | + 125 Max for Fines | For hot materials upto 150 deg. Centigrade such as crushed cement, foundry sand, fertilizers, clinker, sinter, slack, coke etc. | | | | | | + 150 Max for Lumps | | HRT3 | 12 | 350% | 120 | EPDM | + 150 Max for Fines | Very hot & abrasive materials as above upto 200 deg. centigrade | | | | | | + 200 Max for Lumps | |
Add to Enquiry Basket
|
|
Fire Resistant | Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application | | Fire Resistant | Mpa | % Minimum | MM3 | | Degrees | | | FR | 17 | 400% | 200 | SBR Blend | - 30 to + 50 | Coal - above ground and open cast mining. | | | | | | | Coal - Power generation. | |
Add to Enquiry Basket
|
|
Oil Resistance | Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application | | Oil Resistance | Mpa | % Minimum | MM3 | | Degrees | | | OR | 15 | 300% | 150 | NBR Blend | - 30 to + 60 | For materials like grains, refuse, woodchips, fertilizers coated with oil, coated coal / coke, etc. | | MOR | 12 | 300% | 300 | NBR Blend | - 30 to + 50 | For materials with moderate amount of oil like grain, refuse, recycling waste, wood pulp, pinewood etc. | |
Add to Enquiry Basket
|
|
Oil & Heat Resistant | Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application | | Oil & Heat Resistant | Mpa | % Minimum | MM3 | | Degrees | | | OHR | 15 | 400% | 180 | NBR Blend | + 100 Lump | For hot and oily materials such as Coke Plants, Hot Fertilizer etc. | | OHR+ | 13 | 400% | 180 | NBR Blend | + 150 Lump | Very hot and oily material such as Asphalt. | |
Add to Enquiry Basket
|
|
Hygienic Belts We provide a wide range of hygienic belt that is manufactured using best quality raw materials . This find application in food industries for proper handling of the food staffs.
Features:
• Optimum elongation
• Anti-static finish reduces the build-up of dust and dirt
• Surface of conveyor belts are sealed, homogeneous and non-porous
• Reverse side coating, impregnation of reverse side fabrics and edge sealing ensure a completely sealed, hygienic conveyor belt. |
Add to Enquiry Basket
|
Product Showcase
View all our products / services as a slide show.
Play Now
 
|
Copyright © Eureka Conveyor Beltings Private Limited, All Rights Reserved (Terms of Use)
