Industrial
Conveyor Belts
Combining
the cutting edge technology and engineering expertise, we manufacture and
export ISO standard industrial conveyor belts. Precision engineered in sync
with ISO guidelines, these industrial conveyor belts are used in different
industries including airports, shipyards, thermal power plants etc. Optimization of best grade materials ensures the compatibility of these industrial belts with desired applications. These industrial conveyor belts are provided with 2 or more pulleys with a constant loop of material rotating about them, wherein the powered one is called as drive pulley and another un-powered pulley is called idler. We fabricate these industrial belts in varied grades and sizes to perfectly meet the specific demands of our clients. Our range of industrial conveyor belts are appreciated in the industries for saving in labor cost and time.
Features
- Used in material handling equipment
- Driven by a power-operated roll
- Handle bulk material such as sand, coal, biomass fuels, wood chips, paper bales etc.
| Grade | Tensile Strength | Elongation at Break | Maximum Abrasion Loss | Polymer / Rubber | Working Temperature Range | Application |
| General Purpose | Mpa | % Minimum | MM3 | Degrees | ||
| N or N17 | 17 | 400% | 200 | NR | - 45 to + 50 | For moderately abrasive materials such as Rubble, Sand, Super Phosphate, Bone, Coal, Ashes, unslacked lime, cement, bauxite, chalk, cement, Readymix & earth. |
| Y as per DIN 22102 | 20 | 400% | 200 | NR | - 45 to + 50 | For abrasive materials like crushed stones, ROM coal, gravel, earth, sized coke, timber etc. |
| M or M24 | 24 | 450% | 150 | NR | - 45 to + 50 | Highly abrasive material like large size Ore, crushed metallic Ore, Granite, Limestone, Coke, Cold clinker, all types of slacks, sandstones, chipping, quartz, broken glass gravel etc. Also for stackers and reclaimers. |
| X as per DIN 22102 | 24 | 450% | 150 | NR | - 45 to + 50 | Materials mentioned for grade M and material having sharp cutting edges like crushed glass, granite, slacks etc. |
Note :
- Values mentioned above are minimum requirements. Actual values may differ.
- Working Temperature & application are recommendations only. Customer may deviate depending on actual conditions.
- Above is subject to changes with change of process, technology etc.
- Values not mentioned can be obtained from ECB, if required.
1. NR - Natural Rubber
2. NBR - Nitrile Rubber
3. SBR / PBD - General purpose synthetic Rubber.
4. EPDM - Ethylene-Propylene Dimonomer
Packaging
For container shipments, these industrial belts are wound on steel cores. Outer surface of belt roll is covered with rubberized fabric and sides are covered with plastic corrugated flanges. For break - bulk shipments, belts are packed in wooden drums with MS flanges and tie rods on sides.
