Fire Resistant Conveyor Belts

We are a name to be reckoned with in the sphere of manufacturing and export of fire resistant conveyor belts. Specifically designed these fire resistant conveyor belts possess self-extinguishing design and prevent fire from spreading over the entire belt. In order to ensure the fire retardant properties of these fire resistant belts, we conduct various testing according to ISO standards. These tests include drum friction test, flame test, electrical resistance test etc.

Our fire resistant conveyor belts are perfect to prevent fire risks in coal mines and reduce the maintenance of conveyors, which are prone to be damaged by flame at the blast furnaces of iron works. Apart from this, these fire resistant belts also find usage in thermal power plants, mining industry, coal cleaning plants and other industries.

Features

• High tensile strength
• Flame-resistant
• Static-conductive
• Resistant to high heat & wear
• Resistance to the deteriorating effects of materials such as coal treated lightly with oil
• Capability to perform under extreme temperatures
• High abrasion resistance
• Excellent low temperature flexibility

Grade	Tensile Strength	Elongation at Break	Maximum Abrasion Loss	Polymer / Rubber	Working Temperature Range	Application
Fire Resistant	Mpa	% Minimum	MM3		Degrees
FR	17	400%	200	SBR Blend	- 30 to + 50	Coal - above ground and open cast mining.
						Coal - Power generation.

Note :

• Values mentioned above are minimum requirements. Actual values may differ.
• Working Temperature & application are recommendations only. Customer may deviate depending on actual conditions.
• Above is subject to changes with change of process, technology etc.
• Values not mentioned can be obtained from ECB, if required.

Abbreviations :

1. NR - Natural Rubber
2. NBR - Nitrile Rubber
3. SBR / PBD - General purpose synthetic Rubber.
4. EPDM - Ethylene-Propylene Dimonomer

Packaging
For container shipments, belts are wound on steel cores. Outer surface of belt roll is covered with rubberized fabric and sides are covered with plastic corrugated flanges. For break - bulk shipments, belts are packed in wooden drums with MS flanges and tie rods on sides.